|
Amiantit Fiberglass tanks for above ground applications provide an excellent vessel for liquid storage. They are made from polyester or vinylester resin reinforced with glass fiber.
These noncorroding tanks mean lower cost, minimum maintenance and dependable performance. Amiantit Fiberglass tanks are suitable for the storage of water and many common industrial chemicals. |
|
Benefits of Amiantit Fiberglass storage tanks.
- Fiberglass resists Corrosion
The highly corrosion resistant materials ensure excellent performance and prevent contamination of stored materials.
Fiberglass tanks cost considerably less than rubber lined, epoxy lined or stainless steel tanks of equivalent storage capacities.
Rugged fiberglass tanks are designed to provide long and trouble free service.
With Amiantit Fiberglass tanks, maintenance requirements are minimal. Periodic exterior and interior maintenance is generally accomplished by simply washing with water.
Fiberglass tanks are approximately 1/4 the weight of steel tanks of equivalent storage capacity. Lighter, less expensive equipment is needed for installation.
Also lower installation costs due to the requirements of smaller foundations and structural supports.
Our manufacturing plant, located in Dammam, Saudi Arabia, ensures reliable, and fast service at reasonable prices. AFIL's services could extend to other countries within or outside the Arabian Gulf.
Amiantit Fiberglass tanks can safely handle more than 1400 chemicals. Chemicals listed in appendix I are for reference only. For specific information such as chemical concentration, temperatures and other chemicals, contact Amiantit Fiberglass Ind. Ltd. Technical Department.
-
Governing Standards:
- ASTM 133299 Standard specification for filament wound fiber reinforced thermo set resin chemical storage tanks.
- ASTM 132583 Standard test method for identification hardness of rigid plastics by means of Barcol impresser.
- ASTM 133567 Standard method for determining dimensions of "fiberglass" (Glass Fiber Reinforced Thermosetting Resin) pipe and fittings.
- ASTM 132584 Ignition Loss of cured reinforced resin.
Standard Horizontal Aboveground Storage Tanks
Amiantit Fiberglass horizontal storage tanks for above ground application are available in capacities from 500 to 35,000 U.S. Gallons. Tanks shall not be subjected to pressure nor vacuum (tanks must be vented). Vent opening shall be equal or larger than the maximum inlet or outlet size.
Amiantit Fiberglass can supply standard horizontal above ground water tanks in standard sizes as detailed in table I along with all related accessories. For chemical storage, contact Amiantit Fiberglass Technical Department.
Model |
Nominal
Capacity
(USG)* |
“ DIA ”
(mm) |
“ A ”
(mm) |
“ B ”
(mm) |
“ C ”
(mm) |
“ L ”
(mm) |
“ W ”
(mm) |
Number of Cradles |
|
414500 |
500 |
1219 |
305 |
700 |
1310 |
1900 |
855 |
2 |
|
414750 |
750 |
1219 |
305 |
1510 |
2120 |
2710 |
855 |
2 |
|
4141000 |
1000 |
1219 |
305 |
2320 |
2930 |
3520 |
855 |
2 |
|
6141500 |
1500 |
1829 |
390 |
990 |
1770 |
2510 |
1325 |
2 |
|
6142000 |
2000 |
1829 |
500 |
1490 |
2490 |
3230 |
1325 |
2 |
|
6143000 |
3000 |
1829 |
500 |
2935 |
3935 |
4675 |
1325 |
2 |
|
6144000 |
4000 |
1829 |
600 |
4175 |
5375 |
6115 |
1325 |
2 |
|
6145000 |
5000 |
1829 |
1400 |
4015 |
6815 |
7555 |
1325 |
2 |
|
8146000 |
6000 |
2337 |
500 |
3695 |
4695 |
5813 |
1795 |
2 |
|
8148000 |
8000 |
2337 |
600 |
5260 |
6460 |
7578 |
1795 |
2 |
|
81410000 |
10000 |
2337 |
1100 |
6025 |
8225 |
9343 |
1795 |
2 |
|
81412000 |
12000 |
2337 |
900 |
4100 |
10000 |
11118 |
1795 |
3 |
|
81415000 |
15000 |
2337 |
450 |
3913 |
12640 |
13758 |
1795 |
4 |
|
1OH15000 |
15000 |
3000 |
750 |
3048 |
7595 |
8455 |
2255 |
3 |
|
1OH20000 |
20000 |
3000 |
800 |
2890 |
10270 |
11130 |
2255 |
4 |
|
1OH25000 |
25000 |
3000 |
900 |
3717 |
12950 |
13810 |
2255 |
4 |
|
121425000 |
25000 |
3500 |
600 |
4045 |
9290 |
10350 |
2640 |
3 |
|
121430000 |
30000 |
3500 |
600 |
3353 |
11260 |
12320 |
2640 |
4 |
|
121435000 |
35000 |
3500 |
600 |
4008 |
13225 |
14285 |
2640 |
4 |
· 1 USG = 3.785 liters
!Note: Each tank will include one 600 mm diameter manway with cover, Inlet, Outlet and vent. All are 80 mm in diameter. |
